Are you interested in connecting two TVs together with HDMI? Perhaps you want to extend the screen of one TV to the other, or maybe you’re trying to sync audio and video between two TVs. Whatever your reason, today I’m here to talk about the process of connecting two TVs with HDMI and what it involves.
In this blog post, I’ll discuss the pros and cons of this setup, as well as provide some helpful tips and tricks I’ve learned through my own research. So if you’re looking to connect two TVs with HDMI, I’ve got you covered!
Luckily, the answer is yes. Nevertheless, you won’t be using your average HDMI port to connect one TV to the other.
Instead, you’ll need an HDMI splitter cable to connect the input to the cable box or laptop. Meanwhile, there’ll be two output sockets to connect two separate HDMI cables to each TV.
|Can two TVs be connected with HDMI?||Yes, but you’ll need an HDMI splitter cable, with one input for the source device and two output sockets for the TVs.|
|Considerations when using HDMI splitter||1. Low-Quality Output: Long cables may result in lower video quality. 2. Can Be Pricey: Long cables and splitters add to the cost. 3. No Videowall Mode: HDMI splitter can only mirror content. 4. Flickering Screen: May occur with long cables.|
|How to connect two TVs with HDMI splitter||Connect the splitter to the source device, then connect two separate HDMI cables to the output sockets of the splitter and the TVs.|
|HDMI Switch vs HDMI Splitter||An HDMI switch provides one output with multiple sources, while an HDMI splitter transfers one source to multiple outputs. Check the label to ensure you’re purchasing the correct device.|
|Conclusion||You can connect two TVs with an HDMI splitter to show the same image, enhancing your gaming or movie-watching experience.|
What to Consider When Using an HDMI to Link Two TVs
An HDMI or High Definition Multimedia Interface cable allows you to transfer high-resolution video and audio from a single source to another.
On the other hand, an HDMI splitter allows the source’s signal to duplicate and branch to different outputs. Now, before you purchase this splitter, there are a few considerations worth looking at beforehand.
Each HDMI cable has its limitations when it comes to how much it can deliver. This is especially true with longer than 32 feet are bound to lose some quality. With that in consideration, if your two TVs are far apart, then you may risk losing high video quality.
For example, let’s say you’re using your laptop to stream a movie on Netflix and it’s delivering a 4K quality image. First, you have to make sure that both your TVs support 4K imaging. If one of them only supports 1080p, while the other 4K, then both TVs will show a 1080p resolution.
Can Be Pricey
If you’re two TVs are far apart, then you’re bound to get at least one long HDMI cable to reach the splitter. That being so, longer HDMI cables tend to add up in price. Generally speaking, 15-foot, 25-foot, and 35-foot HDMI cables run for around $17, $23, and $26.
As for HDMI splitters, their prices vary depending on how many output sockets you’re purchasing. For instance, a standard two output-port splitter can range from around $11 to $28, depending on the quality of video transfer.
That being so, the total price for connecting your two TVs with an HDMI splitter can go anywhere between, $54 to $77.
No Videowall Mode Available
If you’re looking to connect two TVs for the sake of creating one large screen, then it won’t be possible with an HDMI splitter. This connecting device is mostly limited to mirroring the source only. This may also be a disadvantage because you’ll only have to play the same content for both TVs.
If one of the TVs is too far apart, you may often experience a flickering screen. This issue usually occurs because of the lack of a proper power supply. To resolve this, you can try to move the other TV slightly closer and purchase a shorter HDMI cable. It’ll also provide you with a better video quality.
How to Connect Two TVs Using an HDMI Splitter
Using an HDMI is simple. The first thing you want to do is connect the splitter to the cable box, laptop, or whichever source you decide to use.
Next, you need to have two different HDMI cables for each TV. Connect both of them to the output portion of the HDMI splitter. Then, link the other end to both TVs. That’s it!
Apart from that, HDMI splitters also offer more than two outputs. Some splitters can let you branch your source input into four different TVs.
HDMI Switch or HDMI Splitter?
When looking for an HDMI splitter, you may find several options available. Now, there’s a similarly named product called an HDMI switch, which could get mixed in with the other splitter options.
Both products are different since a splitter transfers a source to multiple outputs, but a switch provides one output with multiple sources such as a gaming console, cable box, and Roku device.
To make sure you’re getting a splitter, you can check the label, where you’ll see a few numbers. For instance, if it says 3×1, then it’s a switch since it provides three inputs for one output. In contrast, if it says 1×3, then it’s likely an HDMI splitter with one source input and three output options.
Can you connect two TVs with an HDMI? In short, yes, you can link two TVs to show the same image by using an HDMI splitter. If you use a normal HDMI cable to connect it with another TV, nothing will happen since there’s no source input coming from the TV like a cable box.
Having said that, having two mirror screens can take your gaming or movie-watching experience to the next level. With an HDMI splitter, the process is much easier than other options like using ethernet.
Read more: Can you connect Xbox to TV wirelessly?