Skip to Content

Powerbeats Pro Ringing Noise (Causes, How to Fix)

One of the best things about Powerbeats Pro is that you can wear the earbuds for a long while. You can spend hours just listening to music, podcasts, or even audiobooks.

That’s all until you start hearing a faint ringing. It’s fine at first, but the issue quickly becomes too obvious to ignore. This leaves you wondering what causes the Powerbeats Pro ringing noise.

Several issues may lead to Powerbeats Pro making a ringing noise. These include signal interference and hardware problems. On occasion, it may also be a software complication.

Let’s take a look at the reasons behind the distortion and what you can do about it.

Causes of Powerbeats Pro Ringing

Pinpointing what’s causing your Powerbeats Pro to ring is a tricky process. There are many reasons this could be happening, and not all of them are easy to diagnose.

Signal Interference

The most common reason for Powerbeats Pro ringing is signal interference.

One of the best aspects of using wireless headphones is not having to deal with cables. Still, this opens up the devices to other problems.

Since the headphones don’t use physical connections, they use radio waves. Your phone will transmit Bluetooth signals to your earbuds.

The earbuds can then process this signal and turn it into sound. For the transmission, Bluetooth will use the air as a medium.

Sadly, the air around you already has many other waves moving around. This could be due to other electrical appliances or just the environment.

The more waves in the air, the more likely they’ll clash. When they interact with each other, this can translate into a sharp ringing or buzzing noise.

How to Fix It?

The best way around this issue is to reduce the number of waves surrounding you. This is a lot easier said than done.

For starters, you can’t see radio waves with the naked eye. That makes it almost impossible to find out how many signals surround you.

In addition, since radio waves aren’t tangible objects, you can’t just move them. They flow around you, and some even pass through you.

So, the only course of action is to try to find a space with fewer signals. To do that, you need a room with no electrical appliances and a wide-open space.

This doesn’t always work, but it should reduce the ringing significantly.

Hardware Problems

Another major cause of Powerbeats Pro ringing is physical damage.

The case that comes with earbuds isn’t just there for charging. It’s also an added layer of protection.

As you can imagine, tiny earbuds can be quite fragile. Any excessive force may cause the insides to shift positions. 

When a wire moves inside the earbuds, a few different things can happen. It could cause the device to short-circuit and stop working, or it may lead to a ringing noise.

Either way, you’re left with headphones you can’t use. This is why many manufacturers prohibit storing earbuds outside their cases.

The same issue can occur if your Powerbeats Pro gets wet. The water can enter the headphones and cause serious damage.

How to Fix It?

Regrettably, when your headphones reach this stage, there’s little you can do. You can try letting your Powerbeats Pro rest for a couple of days.

If the problem is moisture, it’ll give the earbuds enough time to dry out completely.

Other than that, you can contact Apple Support. They may be able to shine a light on what is causing the earbuds to act out.

Still, you may end up having to replace your headphones.

Software Complications

Sometimes, the software can have a huge impact on sound quality. 

Over time, code can degrade and change. This could be due to a failed update or aging technology. That’s why most smart devices get constant updates. 

Either way, you need to refresh both your phone and Powerbeats Pro to resolve this issue.

How to Fix It?

To untangle software complications, it’s best to wipe the slate clean. To do that, follow these steps:

  • Open the Powerbeats Pro case.
  • Place both earbuds into place.
  • Click and hold the system button for about 15 to 20 seconds.
  • Release the button as soon as the LED indicator blinks red.
  • Restart your phone.
  • Remove the earbuds from the case
  • Go to your phone’s Bluetooth settings.
  • Locate your Powerbeats Pro.
  • Start a new connection.

Hopefully, this quick restart can kick-start normal operations. You may need to do this multiple times before the ringing disappears completely, though.

Wrapping Up

Read more: Powerbeats mic is muffled

What are Powerbeats Pro ringing noise causes, and how to fix them? Multiple reasons can lead to Powerbeats Pro making a ringing or buzzing noise.

These include signal interference, hardware problems, and software complications. Some of these issues are easier to solve than others. Still, if you get stuck trying to fix any of them, never shy away from contacting Apple Support.

Read more: Powerbeats Pro one side not working