Skip to Content

Roku Green Light Keeps Flashing: Causes and Fixes

Does your Roku green light keep flashing? Then this is probably an indication that the device isn’t working as it should, which could be caused by a number of reasons.

The LED indicator on a Roku remote persistently flashes green due to the remote being damaged or unable to pair with a Roku device. These green flashes can also occur because of a software glitch or when the batteries are running low.

Read on to learn more about the most common reasons behind this issue and how to fix each one.

Why Does Your Roku Remote’s Green Light Keep Flashing?

Here are some possible causes for your Roku giving off flashes of green light. We’ve also included some handy troubleshooting tips.

1. The Roku Remote Is Damaged

One possible cause for the persistent green flashes of your Roku remote’s LED indicator is that the remote is damaged.

We hate to admit it, but we all have our clumsy moments where we drop our remotes or bump them into a hard surface.

They’re also susceptible to water damage from spilled water, coffee, or any other type of liquid. In addition, exposure to moisture can cause internal components to go haywire, leading to your remote’s unusual behavior.

How to Fix it

If a damaged remote is the source of the issue, you’ll need to contact Roku customer support to arrange a repair. If this isn’t fruitful, then your only option is to replace your Roku remote altogether.

Before you do this, you can try a different Roku remote to confirm that your current remote is faulty. This step will tell you immediately whether you’re on the right path and that you’re not going through all this hassle for nothing.

2. Roku Remote Isn’t Paired

Another meaning behind your remote’s green flashes is that it’s in the process of pairing with your Roku device. Normally, the flashing will cease once pairing is complete.

If your Roku remote and device are unable to pair, then the flashing will persist.

Possible reasons why this may happen include the presence of too many obstacles between your remote and Roku, as well as too many wireless devices being nearby and causing interference.

How to Fix it

You can address this issue by removing any objects that may be obstructing the path of communication between the device and remote.

Also, try switching off any devices emitting signals that might be interfering with your Roku. If thAt doesn’t work, another option is to reset your Roku remote.

Here’s how:

  1. Take out your Roku remote’s batteries and unplug your Roku device.
  2. After ten seconds, switch your Roku device back on and wait for the home screen to appear.
  3. Next, put the batteries back in the remote and press the Reset button, which can either be found on the bottom or the back of the remote for five seconds.
  4. The green light should start flashing, indicating that the pairing process has started.
  5. Once pairing is complete, the light will stop flashing.

3. Low Batteries

A Roku remote may also flash green when its batteries are on the verge of running out of juice. So, because it has insufficient power, it doesn’t operate as it should.

It’s worth noting that the likelihood of low batteries being the cause of your troubles is considerably higher if you’ve had the same batteries in your remote for more than three months.

How to Fix it

The obvious fix for this issue is to put fresh batteries in your Roku remote.

First, remove the old batteries and give the remote about 20 to 30 seconds before sliding in the new batteries. This will give your remote’s internal components a chance to rest and reset.

4. Software Glitches

As with all streaming devices, your Roku depends entirely on its software to function. Sometimes this software can go haywire, usually due to your Roku device suffering from a data overload.

In turn, this could be stopping your remote from pairing with it.

How to Fix it

The best way to fix this is to give your Roku device a hard reset. Here are the steps you’ll need to follow:

  1. With your Roku device plugged in, press and hold the Reset button for 20 to 25 seconds.
  2. Next, unplug your Roku from the power source and release the Reset button.
  3. Plug your Roku back in.
  4. Give your device a try, and hopefully, the problem should now be resolved.


As you’ve seen in this post, there are several possible reasons why your Roku green light keeps flashing.

They include damage to the remote, issues with pairing, and your Roku remote not getting enough power from the batteries. Your troubles could also be due to software glitches in your Roku device itself.

By following the advice in this guide, you should be able to resolve any of these issues with ease!