As an owner of a Panasonic TV, I was frustrated to discover that my TV was flickering when I used my Nintendo Switch. Desperate to find a solution, I did some research and testing to try and figure out why this was happening. Now, I’m here to share with you what I discovered and the solutions I found to fix this issue.
The most likely reasons why your Panasonic TV has been flickering with Nintendo Switch is that you need to set the resolution to 720p, the RGB to limited or you need to change the auto-scan settings. It could also be due to a faulty HDMI, TV, Switch or Switch dock.
Tips for Troubleshooting Panasonic TV Flickering with Nintendo Switch |
---|
– The most likely causes of Panasonic TV flickering with Nintendo Switch are setting the resolution to 720p, setting the RGB to limited, changing the auto-scan settings, or a faulty HDMI, TV, Switch or Switch dock. |
– To troubleshoot the problem, try changing the resolution settings, turning RGB to limited in the settings, turning on or off auto-scan, checking the Nintendo Switch, HDMI cable, and the Panasonic TV. |
– If all else fails, unplugging the dock and plugging it back in or changing the resolution settings on the display settings of the Nintendo Switch can help. |
Table of Contents
Why Does my Panasonic TV Flicker When Using Nintendo Switch?
Below are likely reasons why your Panasonic TV flickers with Nintendo Switch.
Change the resolution settings on your Nintendo Switch
Some people also have had success by changing the resolution settings on the Nintendo Switch. To do this do the following:
Settings -> TV Output -> Resolution
Usually, it is necessary to set the resolution to 720p.
Turn RGB to limited in the settings
Some people have also had success by selecting RGB as limited in the settings on their Nintendo Switches.
In the Switch’s tv settings, turn RGB to limited. System Settings -> TV Output -> RGB Range
Turn on or off Auto-scan
Some people have had success by turning on or off the auto scan in the aspect ratio settings.
The Nintendo Switch
You want to investigate the Nintendo Switch to make sure that there is a proper connection with everything. Start with the console itself.
Do you have it within the docking station the proper way? Is the docking station set up the way you would expect?
Do you see the green light when the Nintendo Switch is in the dock? On top of all this, do you have the HDMI cable secure in the HDMI out slot of the Nintendo Switch docking station?
Finally, be sure the Nintendo Switch has adequate power. If any of these things are off, it could be the cause of the flickering.
The HDMI Cable
The HDMI cable is another thing you want to investigate when it comes to the Nintendo Switch and the Panasonic TV. You want to check out the HDMI cable to see if it is the problem point for the flickering.
The easiest way to make this determination is to do a replacement of the HDMI cable. Swap it out with a different HDMI cable to see if that takes care of the issue.
If it does, that means that the HDMI cable is now defective and needs to be thrown away.
In the event the flickering continues, then that means that the HDMI cable has no issues and it is something else causing the problem.
The Panasonic TV
You rely on your Panasonic TV to do its thing when working with the Nintendo Switch. For the Panasonic TV to function properly, the HDMI input you are using needs to be soundly functioning.
Try taking the HDMI cable and placing it within a different HDMI input on the television. Does that fix the flickering problem? If it does, then you may be in good shape once again.
If it does not, it could be that the input on the television is starting to break, or the screen is burning out and the television needs replacement.
How to Stop Panasonic TV Flickering With Nintendo Switch?
The best way to stop the Panasonic TV from flickering is to get to the source of the problem.
You need to get to the root cause to understand what it is that is causing the Panasonic TV to flicker when you are using the Nintendo Switch.
To start, it would help to try changing the RGB setting and the resolution setting on your Nintendo Switch as explained above.
It could be that you have a problem with the Nintendo Switch, the HDMI cable, or perhaps even the Panasonic TV itself. To get to the source of the problem, though, you need to do troubleshooting.
The more you can troubleshoot, the closer you will get to the problem point. As you narrow down your options, make note of what you try so that you do not repeat the same steps.
Why Does My Nintendo Switch Flicker With Panasonic TV When Docked?
The Nintendo Switch docking station is made to work with any television that supports an HDMI input.
The Panasonic TV is going to fit this mold perfectly and should have no issue displaying what you are sending its way with the Switch.
Some people have had success by unplugging the dock, waiting for a minute and then plugging it back in.
The only other thing we could mention you could try outside of the above is to alter the resolution settings on the display settings of the Nintendo Switch.
If it is trying to output at a resolution the Panasonic TV cannot handle, it could also cause flickering.
Read more: Why does the sound on my Panasonic TV stutter?
As we have stated, many reasons can cause a Nintendo Switch to flicker on a Panasonic TV. To get to the root cause of the problem, try a variety of steps.
Read more: Why does HBO Max freeze on Panasonic TV?
Pros of Panasonic TV with Nintendo switch
- Compatible with all HDMI inputs
- Crisp and clear image quality
- Smooth and responsive gameplay
- Easy to change resolution settings
Cons of Panasonic TV with Nintendo switch
- A faulty HDMI cable or TV can cause flickering
- Changes to settings may be necessary to prevent flickering
- Troubleshooting may be necessary to find the source of the problem