Skip to Content

Why is my Philips TV overheating?

As an exasperated owner of a Philips TV, I’ve been trying to figure out why it’s been rapidly overheating. After doing some research and testing, I’m here to share with you what I’ve learned about this issue, as well as some potential solutions. So, if you’re also frustrated with your Philips TV constantly running hot, this blog post is for you!

While there are many ways to prevent or decrease the risk of your Philips TV overheating, ensuring the vents are clear, removing airflow obstructions, and keeping the television away from any heat sources are a few surefire ways to help the problem. Also, placing the TV in a location where plenty of airflow exists is a good idea.

Quick Tips for Overheating TVs
– Ensure the vents are clear and there is proper airflow.
– Move the TV away from any heat sources and place it in a spot where plenty of airflow exists.
– Lower the brightness of the TV to reduce heat.
– Move the television to a spot without direct sunlight.
– Perform regular maintenance, including cleaning the vents and screen with a microfiber cloth.
– Check for recalls to see if your model is known to overheat.
– Contact technical support if the problem persists.

Why is my Philips TV overheating?

In general, overheating occurs due to the one or many of the following problems:

Brightness turned up

Having the brightness turned up to the maximum setting on the television and letting it sit for hours on end is a great recipe for overheating. 

The brightness is controlled by the backlighting components, so the longer it’s running at the maximum setting, the hotter the hardware will become and the more likely the TV will be to break.

This is also an effective way to minimize the life cycle of the television and likely must purchase one every four years.

In order to maximize the lifespan of your TV and to reduce overheating issues, it would help to lower the brightness.

Moving your TV to a spot without much direct sunlight can help in lowering how bright you need the TV to be.

Clogged vents

The TV has vents so that hot air can flow out of the tv and cold air can flow in. Vents can easily be clogged by dust that becomes caked on or debris that’s covering the holes. 

Without proper maintenance, as time passes, dust will build and eventually block the inbound or outbound venting holes. 

Also, placing items that cover venting on any electronic equipment is never a good idea.

Inefficient airflow

Even if you’ve dusted and cleaned the vents, if your unit is in a confined location with little-to-no airflow, then you’re still going to have a problem. 

Televisions are designed as a system to suck in cool air and blow out hot air in an endless cycle during use.

If either the inbound or outbound vents cannot do their job, the system will overheat and fail.

Proximity to a heat source

Given that televisions emit a lot of heat, mostly due to the backlighting componentry, you don’t want to add to the amount of heat entering the system by placing your television in a hot area, like near a window or a heater. 

Adding heat to an already hot system is a recipe for disaster that can easily be avoided.

What to do if my Philips TV says it is overheating?

Below are the main options you have when getting your Philips TV to stop overheating.

Step one: immediately turn off the power

If you’re Philips TV is telling you it’s overheating, then you must turn off the power immediately. Experts report turning off your device for at least 20 minutes to allow it to cool down.

Step two: check the above causes of overheating

Confirm that the brightness is at a reasonable level (once the TV has cooled down), no vents are blocked, it’s not near any heat sources, and there’s sufficient airflow. 

Step three: check for recalls

If you don’t suspect any of these warning signs to be an issue, then the next step is to check for recalls. Some Philips TV models are known to overheat, so unfortunately your model could be one of them.

Step four: contact technical support

If you notice your model is on this list or isn’t listed but you continue to have problems, then contact technical support for additional assistance. 

They can walk you through the process to dig deeper into the root cause or provide you with a replacement if necessary.

How to prevent a Philips TV from overheating

There are many ways to prevent your Philips TV from overheating, including:

Ensure efficient airflow

Ensuring efficient airflow to and from the television can be accomplished by placing the unit in an open area. 

In addition, one of the functions of a wall mount is to create a gap between the unit and the wall to always ensure proper airflow.

Ideally, you would also place the TV in a spot where there is not much direct sunlight.

Keep the brightness at the recommended setting

This is probably the easiest solution on this list, simply keep the brightness setting at the recommended level. 

As mentioned above, having the TV set to a high brightness level will significantly increase the amount of heat being generated.

The default setting that is available when you turn on the television is where your brightness should always sit. That means you literally don’t have to do anything except enjoy your shows in the current brightness.

Move the TV to a cooler location

By moving your television away from the window and out of the sunlight, you are eliminating an unnecessary heat and humidity source. 

Place the set in the middle of the room which should be at or around room temperature and isn’t impacted by the outside weather.

Perform proper maintenance

Like with any electronic component, you should perform proper maintenance on your Philips TV. This includes regular dusting of the vents and other areas that have gathered material and cleaning the screen with a microfiber cloth. 

Read more: Why does my Philips TV have blue lines

To clean, you can use a hand duster for the vents or compressed air, which blows dust from the holes. When cleaning the screen with a microfiber cloth, never use harmful cleaning chemicals which can damage the components.

Read more: Dead pixels on Philips TV